How to Set-Up SEW-3043 Baby Monitor

March 15, 2016

Not too long ago we released a blog post introducing our new Samsung SEW-3043 baby monitor. Since then we have found this monitor to take off in popularity and based on customer feedback it seems to have been well received. Now that the introduction is done, we thought it would be a good idea to show you guys a step by step guide to set up the monitor. Below is a video showing you the process as well as a more detailed explanation in our blog post! [youtube] How to pair your camera to the monitor: Step 1 – Charge your monitor fully before use. Step 2 – Plug in your camera and turn it on along with the monitor (For the camera you will see the on switch on the bottom right side) Step 3 – Click on the gear on the bottom left corner of the monitor screen and it should take you to the menu settings Step 4 – Click on the second to last icon located on the bottom row [caption id="attachment_3085" align="aligncenter" width="474"]Screen Shot 2016-03-15 at 1 Menu Settings - Click the icon in the red circle to pair cameras[/caption] Step 5 – Now click on the pair button located on the bottom of the camera and there – You’re all connected! *Step 6 (if you want to connect additional cameras) – Repeat the same process as stated above, but just click on the next box to pair up to 4 cameras. If you have trouble getting connected make sure you use the antenna and that you are close enough. Now that your cameras are all set up, it’s time to move onto how to navigate through and use the baby monitor. When you have multiple cameras paired to your monitor you will find that there are two modes in which you can view your live video. The first being the default, which you will see the gear icon on the bottom right and the second is the split screen mode where you will see multiple views from your connected cameras. To switch from the different modes, you simply have to click on the screen. [caption id="attachment_3089" align="aligncenter" width="497"]Screen Shot 2016-03-15 at 1.56.49 PM Split Screen Mode on SEW-3043[/caption] So there you go – Setting up the BrightView baby monitor is fairly simple and straightforward. As always please let us know if you have any questions and we will gladly answer them! Best regards, Soltech Security

Leave a comment

Comments will be approved before showing up.